Aqua-Bloc Black Foundation Coating 18.9 L

Seamless elastomeric membrane made from emulsified bitumen, designed for waterproofing cast-in-place concrete or block foundation walls, insulated concrete forms (ICF), footings, split-slab floors, and retaining walls. Can be applied as a single coat or as a reinforced heavy-duty application.

• Covers 0.5 L to 2 L/m² (approximately 100 to 400 ft²), depending on the application method and material porosity
• Remains flexible from -40°C to 60°C
• Excellent adhesion to most construction surfaces including concrete, stone, wood, treated wood, metal, and polystyrene
• Can be applied to fresh or slightly damp concrete. Should not be applied when ambient air and substrate temperatures are below 5°C
• Bridges cracks up to 1/8 in. wide. For cracks from 1/8 in. to 1/2 in., apply Blueskin WP200 membrane (88001601). Not intended for use on cracks wider than 1/2 in.
• For single-coat application, use a trowel; for reinforced method, refer to technical data sheet
• Contains no solvents and is environmentally safe
• Ideal for insulated concrete form (ICF) foundations

Not designed for use as a permanently exposed surface.